FG SERIES

Products  ›  FlowGuard Pulsation Dampeners  ›  FG SERIES
FlowGuard · FG SERIES

FG SERIES

ASME VIII design with full documentation

The FG Series is the documented, made-to-spec bladder dampener in the FlowGuard line. Shell material, bladder compound, pressure rating and process connection are selected for the service, and each unit ships with a full data book.

Standard tabulated models run from 0.1 to 15 liters in 316 stainless steel under ASME VIII calculations. Larger vessels (30, 50 and 100 liters) are available; those sizes are quoted from design details rather than the standard table.

FlowGuard FG Series Pulsation Dampeners
0.1–15 LStandard tabulated models; larger sizes quoted
4,685 PSIGHighest tabulated rating (FG-10) at 60°C
CustomChoice of shell and elastomer materials
Data bookASME VIII calculations and material certificates

Features

Maintenance-friendly top access

Proprietary charging valve with a dual-seated poppet design

Choice of steel or plastic shell materials

Choice of elastomer bladder materials, including food-grade on request

Fully customizable process connection, threaded or flanged

Full data book: design calculations, material test certificates, hydrostatic and pressure test certificates, certified outline drawing, welding qualifications and procedures where they apply, and IOM

Standard models

Volume range0.1 to 15 liters tabulated; 30, 50 and 100 L quoted to order
DesignASME VIII at 60°C (140°F), 316 SS standard
DocumentationFull data book: calculations, material certs, hydrotest, outline drawing, IOM
FG-100.1 L · 323 barG (4,685 PSIG) · 1/2" NPT · 2.61 in OD × 6.18 in · 7 lb
FG-200.25 L · 317 barG (4,598 PSIG) · 1/2" NPT · 3.24 in OD × 7.72 in · 12 lb
FG-300.5 L · 272 barG (3,945 PSIG) · 1" NPT · 3.74 in OD × 9.96 in · 19 lb
FG-401 L · 226 barG (3,278 PSIG) · 1-1/2" NPT · 4.72 in OD × 10.16 in · 30 lb
FG-502 L · 110 barG (1,595 PSIG) · 1-1/2" NPT · 4.50 in OD × 15.75 in · 32 lb
FG-522.75 L · 110 barG (1,595 PSIG) · 2" NPT · 4.50 in OD × 20.43 in · 39 lb
FG-573.5 L · 91 barG (1,320 PSIG) · 2" NPT · 5.56 in OD × 17.60 in · 49 lb
FG-605 L · 56 barG (812 PSIG) · 2" NPT · 6.63 in OD × 17.24 in · 56 lb
FG-707.5 L · 56 barG (812 PSIG) · 2" NPT · 6.63 in OD × 21.57 in · 63 lb
FG-7710 L · 56 barG (812 PSIG) · 2" NPT · 6.63 in OD × 27.05 in · 72 lb
FG-8015 L · 53 barG (769 PSIG) · 2" NPT · 8.63 in OD × 27.40 in · 120 lb
FG-90 / FG-100 / FG-20030, 50 and 100 L — contact for design details

FG-90, FG-100 and FG-200 are listed on the official sheet without standard pressure, dimension or weight figures.

Materials

Shell, membrane and connections

Common elastomers: NBR, EPDM, Viton, Butyl, Hypalon, hydrogenated NBR, peroxide-cured EPDM; food-grade elastomers on request. Common shells: 316 SS, Hastelloy C, Monel, titanium, Duplex SS, Alloy 20 and carbon steel. Plastic options: PVC, polypropylene and PVDF (Kynar).

Talk to a FlowGuard specialist

Cal West Mashy — representative for Northern California and Western Nevada.

← Back to FlowGuard Pulsation Dampeners