FD SERIES

Products  ›  FlowGuard Pulsation Dampeners  ›  FD SERIES
FlowGuard · FD SERIES

FD SERIES

PTFE diaphragm for improved chemical compatibility

The FD Series uses a solid, contoured PTFE (Teflon) diaphragm instead of an elastomer bladder, in a 316/316L stainless steel housing as standard. It is the FlowGuard choice when the process needs the chemical resistance of PTFE and a simple, documented vessel.

Connections may be screwed or welded flange. Twin-port (flow-through) configurations are available. Each FD unit ships with a full data book.

FlowGuard FD Series PTFE Diaphragm Pulsation Dampeners
0.05–5 LOfficial FD Series threaded models
1,334 PSIGHighest tabulated rating (FD-05) at 50°C
PTFESolid, contoured Teflon diaphragm
ASME VIIIDiv. 1 design with a full data book

Features

Solid, contoured PTFE diaphragm for improved chemical compatibility

Standard housing: 316/316L stainless steel; steel or plastic shells also available

Fully customizable process connection: female thread, flange or hub

Proprietary charging valve with a dual-seated poppet design

Blue fluorocarbon-coated stud-bolts for improved protection in harsh environments

ASME VIII, Div. 1 design calculations, material test certificates, and welding qualifications and procedures

Twin-port (flow-through) configurations available

Standard models

Volume range0.05 to 5.0 liters
MembraneSolid, contoured PTFE (Teflon) diaphragm
DesignASME VIII, Div. 1, A182 F316 at 50°C
FD-050.05 L · 92 barG (1,334 PSIG) · 1/2" NPT · 5.47 in OD × 2.87 in · 15 lb
FD-100.10 L · 91 barG (1,320 PSIG) · 1/2" NPT · 6.18 in OD × 3.43 in · 21 lb
FD-200.25 L · 81 barG (1,175 PSIG) · 1/2" NPT · 7.40 in OD × 4.06 in · 34 lb
FD-300.50 L · 65 barG (943 PSIG) · 1" NPT · 8.94 in OD × 4.45 in · 54 lb
FD-401.0 L · 65 barG (943 PSIG) · 1-1/2" NPT · 10.43 in OD × 5.35 in · 87 lb
FD-502.0 L · 48 barG (696 PSIG) · 1-1/2" NPT · 12.91 in OD × 6.81 in · 191 lb
FD-605.0 L · 48 barG (696 PSIG) · 2" NPT · 16.38 in OD × 8.66 in · 395 lb

Figures are from the official Flowguard USA datasheet cited in Documentation.

Materials

Shell, membrane and connections

Standard non-wetted O-ring options: NBR, EPDM, Viton and PTFE-encapsulated rubber; Kalrez on request. Common shells: 316 SS, 316/316L SS, Hastelloy C276, Monel, titanium, Duplex SS, Alloy 20 and low-temperature carbon steel. Plastic shells: PVC, polypropylene and PVDF (Kynar).

Talk to a FlowGuard specialist

Cal West Mashy — representative for Northern California and Western Nevada.

← Back to FlowGuard Pulsation Dampeners