DS SERIES

Products  ›  FlowGuard Pulsation Dampeners  ›  DS SERIES
FlowGuard · DS SERIES

DS SERIES

In-stock availability with a threaded connection

The DS Series is FlowGuard’s in-stock bladder dampener, built with a 316 stainless steel shell and a threaded process connection. Cal West Mashy sizes and supplies these units for reciprocating pumps in Northern California and Western Nevada.

A nitrogen-charged bladder stores and returns part of each pump stroke, smoothing the discharge flow and reducing pipe vibration. The vessel opens from the top so the bladder can be changed without taking the dampener off the line.

FlowGuard DS Series Pulsation Dampeners
0.1–2 LStandard volumes on the official DS datasheet
4,815 PSIGHighest tabulated rating (DS-10), 316 SS at 100°C
316 SSStainless steel shell as standard
In-stockThreaded connection, short lead time

Features

Maintenance-friendly top access for on-site bladder replacement

Proprietary charging valve with a dual-seated poppet design

316 stainless steel shell as standard

Choice of EPDM, NBR or Viton elastomer bladder materials

Flanged connections available with a short lead time

Hydrotest certificate included as standard

Supplied with installation, operating and maintenance instructions and a pressure test certificate; normally available from stock or on a short lead time

Standard models

Volume range0.1 to 2 liters (DS-10 through DS-50 on the official sheet)
Shell316 stainless steel as standard
BladderEPDM, NBR or Viton
Design basis316 SS at 100°C (212°F), official DS-A-1109.pdf
DS-100.1 L · 332 barG (4,815 PSIG) · 1/2" NPT · 2.61 in OD × 6.18 in · 7 lb
DS-200.25 L · 325 barG (4,714 PSIG) · 1/2" NPT · 3.24 in OD × 7.72 in · 12 lb
DS-300.5 L · 278 barG (4,032 PSIG) · 1" NPT · 3.74 in OD × 9.96 in · 19 lb
DS-401 L · 230 barG (3,336 PSIG) · 1-1/2" NPT · 4.72 in OD × 10.16 in · 30 lb
DS-502 L · 111 barG (1,610 PSIG) · 1-1/2" NPT · 4.50 in OD × 15.75 in · 32 lb

Figures are from the official Flowguard USA datasheet cited in Documentation.

Materials

Shell, membrane and connections

Standard shell: 316 stainless steel. Standard bladders on this sheet: EPDM, NBR or Viton. Alternate elastomers (Butyl, Hypalon, hydrogenated NBR, peroxide-cured EPDM or food-grade) and alternate shells are covered on the FG Series datasheet.

Talk to a FlowGuard specialist

Cal West Mashy — representative for Northern California and Western Nevada.

← Back to FlowGuard Pulsation Dampeners