TECHNICAL DATA

Nominal capacity
BE   1.000 - 32.000 L

Design data
Pressure: - 1 to +6 bar
Temperature : -25 to +200°C

Design and calculation codes
VSR/AD-Merkblatter/ASME VIII div.1/CE stamp
PED 97/23/EC module cat. IV

Construction tolerance
To DIN 28006 T2

Construction
BE : one piece construction 

Jacket design
As standard type B1 acc. to DIN 28151
On request other types acc. to DIN 28151

Design of half-pipe coil
Design of half-pipe coil
The half-pipe coil is supplied as an alternative to the jacket.
Shape of the fluid flow section : half-pipe (DIN 28128)
Zones : one or more to be agreed
Single or double circuit : to be agreed

Nozzles

• Flanges to DIN 2501 PN 10

• All glass-lined nozzle are complete with loose backing split flanges acc. to DIN 28150 

• Other flange standards (ANSI) on request

Gaskets

• PTFE envelope type with stainless steel insert for all glass-lined connections

Agitator system BE:

• Removable turbine agitator with presslock  

• Coupling system 

• Standard design : three blade 45 degree 

• Pitched-blade turbine combined with beaver tail 

• Baffle(s) acc. to DIN 28146

• Other designs available on request : Retreat-blade impellers acc. to DIN 28157 (two piece construction), multiple turbine agitators, wide blade turbine, etc..

Drive unit

• Asynchronous three-phase electric motor, EEx-d certified

• Speed reducer with ground profile gears

• Connection between motor and reduction gear : direct monted

• Pedestal acc. to DIN 28162 T1 (with drive flange acc. to DIN 28137)

Atex conformity
Our standard : external + internal = Group II , Category 2 , G (zone 1) D (zone 21)


Shaft seal

• Acc. to DIN 28138 T2 and T3

• Double mechanical seal assembly of cartridge design for quick replacement, side dismantling without removal of gear with thermometer and pressure gauge

• Pressurising and lubrication unit with thermosyphon circulation complete with hand-pump for topping up

Supports

• Legs - Side brackets - Support rings acc. to DIN 28145 T4 

• Other designs supplied on request

Glass-Lining

• Vessel G2208 Blue, White or Light-Blue 

• Available also other types of glass to suit specific requirements. 

More specific data can be obtained from our laboratories

Test and inspection of the glass-lining to DIN 28063

• Visual inspection - Thickness control of the coating 

• Statiflux (electrified particle test) 

• Spark test to ISO 2746 - For vessel and accessories, at 20.000V immediately after glass-lining. For vessel and accessories, at 12.000V prior to shipment

The supply includes

• Glass-lined protection ring for the manhole 

• Spring-assisted lifting device to open the manway cover 

• Sight glass 

• Light glass.

OPTIONS

• Bottom outlet glass-lined valve, stem design, manually driven or pneumatically driven or pneumatically actuated.

• Light fitting, EEx-d certified

• Agitating nozzles in the jacket inlets to increase the circulation velocity of liquid media in the jacket.

• Glass-Lined tip with platinum mini-tip melted into glass for a fast-response 

• Temperature probe, which can be combined with the electrodes for the continuous glass control probe (RP probe)

• Control probes = Temperature: 2xPT100 completely glass-lined or by tantalum tip - pH or redox 

• Detection of glass-lining failure (RP probe)

• Glass-lined or PTFE-lined dip-pipes. Other corrosion resistant materials are also available. 

• Sampling probe - Simple or continuous type with circulation washing pump and eventually pH probe on the circuit.

• Atex check device for monitoring mechanical units 

• Fast closing device

• Powder charging device

• Eventually others on request